Page 1 of 1

Using a 4s (14v) on the finwing penguin 2815

PostPosted: Tue Mar 19, 2013 9:59 am
by Dogman
Ive got a 5000mah 4s that I want to run my 2815 motor...is this OK...if need be can I put a dc/dc converter in...thanks

Re: Using a 4s (14v) on the finwing penguin 2815

PostPosted: Tue Mar 19, 2013 11:21 am
by cynr100
If you are using an ESC rated for 2-6S & 60A or better, yes, but use the 2 blade prop 9060E .
If you're in Oz see http://othfpv.com.au/APC-9x6E-Thin-Propeller.html

More info here :

http://www.finwinghobby.com/product_view.aspx?id=4

Re: Using a 4s (14v) on the finwing penguin 2815

PostPosted: Tue Mar 19, 2013 8:51 pm
by Dogman
Thanks cynr...OTH is currently setting up in Perth...just for info

Re: Using a 4s (14v) on the finwing penguin 2815

PostPosted: Wed Mar 20, 2013 12:22 am
by cynr100
Yes,was aware, that's why I thought I'd jam my 2 cents worth in :roll: I don't envy him the drive........I did suggest he do an FPV type drive :o ..........cam on the roof and fatsharks behind the wheel :lol: :lol: