What size servo for a Extra 260 50cc 2.2m

For those who hover and harrier

What size servo for a Extra 260 50cc 2.2m

Postby ballsey » Sun Sep 05, 2010 3:07 am

I'm building a Extra 260 50cc to electric conversion. It has a wing span of 2.2 mtr (86 inches) and will weigh in at 8kgs. What size servo should I be using. Does the rudder servo need to be larger as well.
ballsey
 
Posts: 13
Joined: Wed May 05, 2010 3:28 pm

Re: What size servo for a Extra 260 50cc 2.2m

Postby RCModelReviews » Sun Sep 05, 2010 10:01 am

It depends a little on the type of flying you intend to do.

If it's sport/pattern flying then you'll be able to get by with lower-power servos than if you want to do 3D.

I'd go for something in the range of 10Kg/cm of torque, definitely metal geared and might as well be digital.

I'm reviewing a bunch of servos in that ballpark at the moment with results due up soon.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: What size servo for a Extra 260 50cc 2.2m

Postby parkfly27 » Mon Oct 11, 2010 10:29 pm

i am using the HX12K servos all around on my 50cc size wagstaff extra i converted to electric. I fly the snot out of it and they are working flawlessly. They work best on 6V, an require a large BEC (i am using a 8-Amp bec)
http://www.hobbyking.com/hobbyking/stor ... dProduct=2

Also u probably already know this, but the rudder should use a pull-pull setup... with a regular linkage, when it pushes, the force if the pushrod combined with the drag of the rudder surface will want to tear it off (especially with a large counterbalanced rudder). My rudder is coming loose at the hinges, so i will invariably have to go with a pull-pull setup sooner than later.


Hope your project goes well!
parkfly27
 
Posts: 5
Joined: Mon May 17, 2010 9:07 pm


Return to 3D Flying

Who is online

Users browsing this forum: No registered users and 2 guests