Turnigy V-Bar 600 Flybarless System (v3)

Helicopter-specific issues relating to the electronics in your bird

Turnigy V-Bar 600 Flybarless System (v3)

Postby tommy » Wed Jun 23, 2010 1:12 pm

You mentioned that you may be doing a review on the Turnigy V-Bar 600 Flybarless System (v3) in one of your not so weekly News :)
I would be very interested in this. Hopefully HK will send you one to review.
tommy
 
Posts: 39
Joined: Sat Jun 19, 2010 9:46 am

Re: Turnigy V-Bar 600 Flybarless System (v3)

Postby RCModelReviews » Wed Jun 23, 2010 7:31 pm

As I've discovered, HK doesn't seem to send out review samples (even when they say they will... no sign of those Spektrum-compatible receivers they promised yet).

With money spent this month on transmitters, video systems and servos, the review budget is a bit low but once it's replenished, I'll probably do some heli-stuff for a change and the flybarless system looks like a good place to start.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Turnigy V-Bar 600 Flybarless System (v3)

Postby Helikiwi » Wed Aug 25, 2010 9:58 am

These are good gyros for the money and less affected by vibration than the Align 3G - not as good as the Skookum SK-720 though

read through the manual (better version) http://www.hobbyking.com/hobbyking/stor ... 838X41.pdf

I've set up 4 now and are fairly easy (I give it 4*'s)
User avatar
Helikiwi
 
Posts: 2
Joined: Tue May 04, 2010 7:50 am
Location: New Zealands riviera

Re: Turnigy V-Bar 600 Flybarless System (v3)

Postby stevewashere » Tue Feb 01, 2011 9:13 am

Id be interested in the RC model review on this one
stevewashere
 
Posts: 27
Joined: Fri May 07, 2010 10:33 am
Location: Auckland, NZ


Return to Radios, Gyros, Servos

Who is online

Users browsing this forum: No registered users and 3 guests