Optic 6 - Gyro switch Howto
Posted: Thu May 20, 2010 10:26 pm
This post is a shorter version of a post i put at helifreak and heliguy, i thought maybe it could help someone:
The Optic 6 manual states that the gyro channel has to be attached to a flight mode. At the same time, the manual also describes SW-2 as Gyro switch, but does not explain how to configure this.
Some googling and fiddling around gave me this approach to do this:
I ended up with the following:
Well, I hope this is useful for someone.
The Optic 6 manual states that the gyro channel has to be attached to a flight mode. At the same time, the manual also describes SW-2 as Gyro switch, but does not explain how to configure this.
Some googling and fiddling around gave me this approach to do this:
- Disable gyro in Tx (Inh)
- Maybe reverse channel 5
- Change EPA for channel 5, both switch positions (i started with 50 for each, and worked from there)
I ended up with the following:
- GYRO: Inh
- REV: Ch 5: N
- EPA: Ch 5, L/U: 30
- EPA: Ch 5, R/D: 70
Well, I hope this is useful for someone.