Turnigy Radio Upgrade

Problems, experiences or just something to say about RC gear? Say it here.

Turnigy Radio Upgrade

Postby copter » Wed Dec 08, 2010 3:17 am

Any more info about the Turnigy radio upgrade on the main page. I've checked back over the past few weeks and haven't seen anything. Did I miss it?
copter
 
Posts: 2
Joined: Tue Dec 07, 2010 9:15 pm

Re: Turnigy Radio Upgrade

Postby disco stu » Wed Dec 08, 2010 3:51 am

There is already some info on here how to do it, along with the page Ereza made with his version of the firmware-ER9X. If you google that you will get his page, and there is instructions in there on how to do it. Not overly hard, just nerve racking soldering to something like that. I put some pictures on the topic in here for it that will help if you do it.

I gather Bruce is a busy boy, hence why it hasn't been put up yet
disco stu
 
Posts: 190
Joined: Fri Oct 15, 2010 4:58 am

Re: Turnigy Radio Upgrade

Postby disco stu » Wed Dec 08, 2010 3:52 am

disco stu
 
Posts: 190
Joined: Fri Oct 15, 2010 4:58 am

Re: Turnigy Radio Upgrade

Postby RCModelReviews » Wed Dec 08, 2010 6:37 am

Yep, I'm editing as fast as my crusty old PC will go. Unfortunately, video edits are *really* slow with this machine and while it's rendering video it's almost unusable for anything else -- like image-editing and formatting up webpages :-(
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Turnigy Radio Upgrade

Postby copter » Wed Dec 08, 2010 3:25 pm

Thanks for the quick replies.

I'm really looking forward to the video.

Keep up the great work.
copter
 
Posts: 2
Joined: Tue Dec 07, 2010 9:15 pm

Re: Turnigy Radio Upgrade

Postby Cervus » Wed Dec 15, 2010 4:33 pm

I'm sorry about your slow machine. There is a workaround to 'fix' that problem. You can lower the priority of the process of the task in the process explorer (control + alt + Supr) if you are in a windows Xp/Vista/7 enviroment. This way you can use your computer for your use.
There is a good info in disco stu's thread too.
Cervus
 
Posts: 5
Joined: Thu Dec 02, 2010 11:36 pm

Re: Turnigy Radio Upgrade

Postby erezra » Wed Dec 15, 2010 6:48 pm

I think we're all waiting for this review.
Common Bruce! Don't leave us hanging! :D
!!! BEWARE - WE ARE IN THE AIR !!!
http://www.eraviv.com
erezra
 
Posts: 37
Joined: Fri Jun 25, 2010 7:10 pm

Re: Turnigy Radio Upgrade

Postby Captain351 » Wed Dec 22, 2010 11:00 pm

No matter how fast a computer you have video encoding is going to slow it to a crawl.

Best to have a second computer and a KVM switch to switch back and forth. I actually have 4 machines running that way because I just can't stand waiting!

Captain
Captain351
 
Posts: 21
Joined: Wed May 12, 2010 11:53 pm

Re: Turnigy Radio Upgrade

Postby BillGriffiths100 » Wed Jan 12, 2011 10:31 am

Hi Bruce,
In eager anticipation of your article / video I have bought a Turnigy 9x, a smart USB light AVR programmer, and downloaded various software drivers. I am poised ready to go, my breath is totally baited, I have dragged out my old xp laptop.
Any idea when you will be able to publish?
Regards,
Bill
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .

You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
User avatar
BillGriffiths100
 
Posts: 553
Joined: Mon Sep 20, 2010 2:04 pm
Location: London UK

Re: Turnigy Radio Upgrade

Postby aesmith » Wed Jan 12, 2011 3:13 pm

BillGriffiths100 wrote:Hi Bruce,
In eager anticipation of your article / video I have bought a Turnigy 9x, a smart USB light AVR programmer, and downloaded various software drivers. I am poised ready to go, my breath is totally baited, I have dragged out my old xp laptop.
Any idea when you will be able to publish?
Regards,
Bill

If you've got the radio and the programmer, sounds like you're in pole position to do your own review!
aesmith
 
Posts: 101
Joined: Tue May 04, 2010 11:45 am
Location: Scotland

Next

Return to Radios and Servos

Who is online

Users browsing this forum: No registered users and 3 guests

cron