teddy1908 wrote:Hi guys,
I was checking the FRSKY system and am now interested in installing it in an older model futaba trensmitter, the FC 16.
I have a few questions now and would really appreciate it if you could help me anwser then.
1. Do the hack modules have 2way (telemetry) option and which one (a link if possible)
2. Do I still need to use a diode to lower the voltage to the hack module (if not I am looking for a link to the module that does not need it).
3. Do the non telemetry receivers work with the telemetry transmitter module.
If any of you are interested in a similar modification, please let me know so I will post some photos.
best regards
Tadej (from Slovenia)
Hi teddy1908
1) No , at the moment Im writing there is no 2way (telemetry) hack module , only the ones for futaba tx and JR tx.
2) All the new "normal" hack modules (non telemetry) have allready installed the diode.
3) Yes the "normal" non telemetry receivers work with the telemetry tx modules , you must change a switch at the back of the module to do so.
PD: If you REALY need a 2 way for your FC 16 and have some soldering/electronics skill you can always hack a Frsky futaba tx 2 way module .
a) External hack
http://www.rcgroups.com/forums/showthre ... st16386863 b) Internal hack ,more dificult because you have to uncase and separate the 2 boards of the tx module
http://www.rcgroups.com/forums/showthre ... st15784499Note that in both cases you must install the diode as this module do not have it internaly , and of course you will loose the warranty over
the tx module .