Excellent. FPV Build Part 2

Do you have any general comments on the website or the RCModelReviews YouTube Channel? Post your complaints, your suggestions and your opinions here.

Excellent. FPV Build Part 2

Postby pprioverde » Sun Jul 29, 2012 5:58 am

Awesome Bruce.

Here are my antennas. Built exactly to your instructions. It seems to be a much easier method than what is already out there. Thanks.

Image

I did the math and I figured that your dimensions are for about 5.67GHz. Looking at the specs for the TX5823 and RX5808 units. There is a big gap in the channels around 5.8Ghz. So building for 5.67Ghz makes sense. I guess you just called it 5.8 in the video to not confuse people. Anyway, any idea why there is a gap?

Image btw is from my website you might like to take a look. http://www.rchacker.com

cheers, Marc.

5645
5665
5685
5705

5885
5905
5925
5945
pprioverde
 
Posts: 15
Joined: Thu Jun 14, 2012 3:15 pm
Location: Ecuador

Re: Excellent. FPV Build Part 2

Postby Hal9000 » Mon Jul 30, 2012 11:17 am

Well done Marc on your site. Interesting and informative. A great addition to the world of RC!
Hal9000
 
Posts: 73
Joined: Sun Jul 01, 2012 2:44 pm
Location: Auckland, New Zealand

Re: Excellent. FPV Build Part 2

Postby tignmeg » Thu Aug 02, 2012 12:05 am

+1 Yep Marc you are doing a good job with that site keep it up.
Can't help you on that gap question. I'm sure Bruce will have some idea.
tignmeg
 
Posts: 2
Joined: Wed Aug 01, 2012 11:59 pm

Re: Excellent. FPV Build Part 2

Postby pprioverde » Sun Aug 05, 2012 7:21 am

Cheers guys.
pprioverde
 
Posts: 15
Joined: Thu Jun 14, 2012 3:15 pm
Location: Ecuador

Re: Excellent. FPV Build Part 2

Postby pprioverde » Thu Aug 09, 2012 10:10 pm

I found a thread on the Hobbyking forums with the answer.

The chipset inside has 5 lines to control 24 channels while the board only makes use of 3 lines and 8 channels. There is also a second audio channel that is unused.

Marc.
pprioverde
 
Posts: 15
Joined: Thu Jun 14, 2012 3:15 pm
Location: Ecuador

Re: Excellent. FPV Build Part 2

Postby doonunder » Sat Oct 13, 2012 12:41 am

I'm guessing these are 1/2 wave, is a 1/4 wave clover feasible for my FpV ladybird?
doonunder
 
Posts: 2
Joined: Fri Oct 05, 2012 8:44 pm


Return to Feedback on this website

Who is online

Users browsing this forum: No registered users and 6 guests

cron