FPV backpack 200mw pin config

To discuss all things relating to flying models via remote video

FPV backpack 200mw pin config

Postby Bruce8 » Sat Sep 14, 2013 10:30 am

Hi,
I am building the fpv backpack and on the bruce's schematic, the pin layout seems to be inverted to the one that is specified by rangevideo. Has anyone else seen this? Which is correct Bruce's schematic or rangevideo? Bruce's schematic says that the video in should be pin 5 but range video says it is pin 1. Please help
Schematic:http://www.rcmodelreviews.com/filestore/Schematic.pdf
Rangevideo:http://www.rangevideo.com/index.php/5-8ghz-200mw-audio-video-transmitter-module.html under additional information
Bruce8
 
Posts: 20
Joined: Wed Jan 02, 2013 11:43 am

Re: FPV backpack 200mw pin config

Postby michaelogri » Sun Jan 05, 2014 9:24 am

Hi Bruce8
Pin 5 it is, Video In on board goes to Pin 5 via 470uF Cap. And my completed board using TX5823 from SDSHobby work fine.
michaelogri
 
Posts: 17
Joined: Thu Feb 07, 2013 10:21 pm


Return to FPV

Who is online

Users browsing this forum: No registered users and 7 guests